Barco R92112011, User Manual

Page: 130 / 210

7. Advanced
The adjustment of hard edges is done in the same menu as the soft edge with the Edges disabled (unchecked).
How to setup a hard edge shape ?
1. Press the MENU key to activate the Tool bar.
2. Push the cursor key ← or → to highlight Display setup
3. Push the ↓ key to pull down the menu
4. Push ↓ or ↑ to select Soft edge
5. Push the → key to pull down the menu.
6. Push the cursor key ← or → to highlight Edit left...
Image 7-142
7. Press ENTER
The soft edge dialog box will be displayed.
8. Uncheck all the edges
9. Adjust the soft edge as desired (same procedure as above)
10.Press BACK to return to the Display setup menu.
7.8.6 Auto Image Setup
What can be done ?
Auto Image allows to detect automatically the characteristics of the source (total pixels per line,...) and uses this information to adapt
the image to the display.
Auto Image can adapt the image based on following data :
• Total pixels/ lines
• Start pixel/lines
• Phase
• Contrast/brightness levels
Auto Image works only for data signals.
To launch Auto Image, see Auto Image in the Image fi les menu
How to set up Auto Image?
1. Press MENU to activate the Tool bar
126 R59770066 SIM 7Q SERIES 08/12/2014