Barco R92112011, User Manual

Page: 27 / 210

4. Installation
Image 4-21
Lens
fi xation nuts
6. Fix the lock nuts until the lens fl ange touches the lens holder plate at the 3 fi xation points (nominal position).
7. Unscrew each lock nut 1 revolution and start adjusting the Scheimp fl ug by tightening or loosening these lock nuts
8. If the adjustment is done, screw in the smaller Allen bolts M4 (see “1” on image 4-22) until they are hand-tight
Image 4-22
Lens: Scheimp
fl ug securing bolts and nuts
9. Secure the smaller Allen bolts M4 by tightening the nuts (see “2” on image 4-22) to the lens fl ange.
10.Install the bottom lens cover
11.Install the top lens cover
4.5.5 Connecting the lens
What must be done ?
The lens must be connected to the projector to allow the control of the Zoom and Focus and to allow data communication for the
aperture control.
Connecting or disconnecting the lens while the projector is powered can cause damage to the lens aperture and may never be done.
Therefore a warning is displayed if the lens is not connected and the projector is activated.
Image 4-23
R59770066 SIM 7Q SERIES 08/12/2014 23