Barco R92112011, User Manual

Page: 105 / 210

7. Advanced
4. Use the cursor key ↑ and ↓ to select the desired geometry fi le and press ENTER to select.
A message will be displayed.
Image 7-93
5. Press ENTER to con fi rm.
The selected fi le is deleted and removed from the list.
6. Press BACK to return to the Geometry Edit menu.
7.6 Lamp
C
AUTION
:
Read the section about the warranty of lamps in relation to the runtime mode on "Warranty: con-
tinuous mode / automatic shutdown mode", page 35.
Overview
• Runtimes
• Lamp runtime warning
• History
• Reset lamp Runtime
• Lamp power mode (only for SIM 7Q & SIM 7Q HC)
• CLO Mode
7.6.1 Runtimes
Typical runtime
The lamp for this projector has its typical runtime. It must be replaced when the runtime is reached.
When this runtime is reached, a warning will be displayed on the projected image and the warranty will have expired. The warning
message can be removed from the image by pressing the
Back key on the RCU, but it will pop-up again every time the projector is
switched to the active state, until the lamp has been replaced.
How to display the runtimes ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamps item
3. Press ↓ to pull down the Lamps menu
4. Use ↑ or ↓ to select Runtimes
Image 7-94
5. Press ENTER
R59770066 SIM 7Q SERIES 08/12/2014 101