Barco R92112011, User Manual

Page: 43 / 210

5. Setup
5.6 Setting the orientation
What must be done ?
Depending on the mechanical orientation of the projector (see Projector con fi guration in the Installation section), the projector’s
internal settings have to be adapted.
The projector is shipped (default) with a table/front orientation.
How to set the orientation ?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Orientation
Image 5-8
5. Press → to pull down the menu
6. Use ↓ or ↑ to select the desired orientation
7. Press ENTER
The projection is adapted and a bullet shows the active con fi guration.
5.7 Lens adjustments
Overview
• Locking the lens holder (rugged option)
• Locking / unlocking the zoom ring and the focus ring of the lens
• Back focal length adjustment
• Adjusting the lens
If the lens locking option (= rugged option) is installed on the projector, a warning will be displayed before the
execution of any lens shift adjustment.
5.7.1 Locking the lens holder (rugged option)
The lens locking system is an option (rugged option) and is not available on standard projectors.
R59770066 SIM 7Q SERIES 08/12/2014 39