manualshive.com logo in svg

Barco R9002400, Owner'S Manual, Page: 88 / 102

Share
Download
Barco R9002400 Owner'S Manual Download Page 88

                             

Service Mode

8-17

5976194 BARCOCINE 9  31012002

All settings to Midposition

What can be done ?

All adjustment settings can be set to midposition.

How to set to midposition ?

1.

Push the cursor key 

é

 or 

ê

 to highlight 'All Settings to Midposition' (menu 1).

2.

Press ENTER to select.
A confirmation menu will be displayed  first (menu 2).

3.

Press ENTER to confirm.
Press EXIT to cancel the operation 'set all settings to their midposition'.

Undo all settings to midpos

What can be done ?

'Undo all settings to Midposition' is displayed in the Memory management menu in stead off 'All settings to midposition' when this latter
is pressed.

An undo is possible as long as the projector is running on the same source (= same adjustment block) even when some adjustments
as geometry or convergence are already readjusted.  When undo is presssed all settings are reset to the previous settings.

How to cancel 'Set to midposition' ?

When "All settings to midpos" is selected, all settings are set to their midposition.  To cancel this action :
1. Push the cursor key 

é

 or 

ê

 to highlight 'Undo all settings to midpos' (menu 1).

2. Press ENTER to cancel the set to midposition action.

Press EXIT to cancel the procedure 'undo set to midposition'.

Select with 

é

 or 

ê

then <ENTER>

<EXIT> to return.

SET TO MIDPOSITION

menu 1

ALL SETTINGS TO MIDPOSITION

All settings
in current block
will be overwritten !

<ENTER> to confirm
<EXIT> to cancel

menu 2

R&B CONVERGENCE MID

GREEN CONVERGENCE MID

FOCUS TO MIDPOSITION

E-W TO MIDPOSITION

N-S TO MIDPOSITION

DIG VERT LINEARITY MID

DIG HOR LINEARITY MID

ASTIGMATISM MIDPOSITION

ALL SETTINGS TO MIDPOS

Select with 

é

 or 

ê

then <ENTER>

<EXIT> to return.

SET TO MIDPOSITION

menu 1

R&B CONVERGENCE MID

GREEN CONVERGENCE MID

FOCUS TO MIDPOSITION

E-W TO MIDPOSITION

N-S TO MIDPOSITION

DIG VERT LINEARITY MID

DIG HOR LINEARITY MID

ASTIGMATISM MIDPOSITION

UNDO ALL SETTINGS TO MIDPOS

Summary of Contents for R9002400







































































































Reviews:

No comments