Service Mode
8-7
5976194 BARCOCINE 9 31012002
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
menu 1
Common Address
What can be done ?
Every projector listens to a common address. This common address can be set to '0' or '1'. When a RCU is programmed with that
common address, every projector with that same common address will follow up the commands given by that RCU.
Why 2 different common address ?
The reason to have the choice to select between common addresses is, to avoid controlling of other IR controlled units, e.g. a TV
set with standard common address 0.
How to change the common address ?
1. Push the cursor key
é
or
ê
to highlight Common Address (menu 1).
2. Press ENTER to toggle between '0' and '1'.
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
menu 1
Power up mode
What can be done ?
When pressing the power switch, the projector can start up in 'operating mode' or in 'stand-by mode'.
Operating mode : the projector start up and displays image .
Stand-by mode : the projector start up in stand-by and waits until the stand-by button or a digit key is pressed.
How to change the mode ?
To change the Power up mode:
1. Push the cursor key
é
or
ê
to highlight Power Up (menu 1).
2. Press ENTER to toggle between 'Operating' and 'Standby'.
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
PROJECTOR WARM UP
POWER UP MODE :
operating
COMMON ADDRESS : 0
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
PROJECTOR WARM UP
POWER UP MODE : operating
COMMON ADDRESS :
0