manualshive.com logo in svg

Barco R9002400, Owner'S Manual, Page: 84 / 102

Share
Download
Barco R9002400 Owner'S Manual Download Page 84

                             

Service Mode

8-13

5976194 BARCOCINE 9  31012002

East-West to Midposition

What can be done ?

The east-west settings can be set to midposition.

How to set the E-W settings to midposition ?

1. Push the cursor key 

é

 or 

ê

 to highlight 'E-W to midposition' (menu 1).

2. Press ENTER to select.

A confirmation screen will be displayed first (menu 2).

3. Press ENTER to confirm.

Press EXIT to cancel the procedure to set the E-W settings to their midposition.

Select with 

é

 or 

ê

then <ENTER>

<EXIT> to return.

SET TO MIDPOSITION

menu 1

E-W TO MIDPOSITION

E-W settings
in current block
will be overwritten !

<ENTER> to confirm
<EXIT> to cancel

menu 2

R&B CONVERGENCE MID

GREEN CONVERGENCE MID

FOCUS TO MIDPOSITION

E-W TO MIDPOSITION

N-S TO MIDPOSITION

DIG VERT LINEARITY MID

DIG HOR LINEARITY MID

ASTIGMATISM MIDPOSITION

ALL SETTINGS TO MIDPOS

Undo East-West to midposition

What can be done ?

'Undo East-West to midposition' is displayed in the Set Midposition menu in stead off 'E-W to midposition' when this latter is pressed.
The settings for the E-W can be returned to previous installed settings as long the projector is playing on the same source ( = same
adjustment block).

How to Undo the E-W to midposition ?

1. Push the cursor key 

é

 or 

ê

 to highlight 'Undo E-W to midposition' (menu 1).

2. Press ENTER undo.

Select with 

é

 or 

ê

then <ENTER>

<EXIT> to return.

SET TO MIDPOSITION

menu 1

R&B CONVERGENCE MID

GREEN CONVERGENCE MID

FOCUS TO MIDPOSITION

 UNDO E-W TO MIDPOSITION

N-S TO MIDPOSITION

DIG VERT LINEARITY MID

DIG HOR LINEARITY MID

ASTIGMATISM MIDPOSITION

ALL SETTINGS TO MIDPOS

North-South settings to Midposition

What can be done ?

The north-south settings can be set to midposition.

Summary of Contents for R9002400







































































































Reviews:

No comments