Connections
2-6
5976194 BARCOCINE 9 31012002
RGB Analog source with Tri-level sync to port 4/5.
Which signal to port4/5
RGB analog input terminals with Tri level sync input or with Tri-level sync on green (BNC terminals). The projector detects automatically
where the sync signal is located.
RGB3S or RG3sB input selection
With the RCU, press digit button 7
Component source to port 4/5.
Which signal to port 4/5
(R-Y)Y(B-Y) analog input terminals with sync input or with sync on the luminance (Y) input (BNC terminals). The projector detects
automatically where the sync signal is located.
Component video input selection
With the RCU, press digit button 6
RS232 Connection
RS232 input and RS232 output of the projector.
The projector is equipped with a RS232 port that allows them to communicate with a computer.
Applications
a) remote control:
- easy adjustment of the projector via a computer.
- allow storage of multiple projector configurations and set ups.
- wide range of control possibilities.
- address range from 0 to 255.
b) data communications:
- sending data to the projector or copying the data from the projector to a hard memory device.
Set up of the Baud Rate for Communication with a Computer.
See 'Changing the baud rate' in chapter 'Service mode'.
Communication port for communication with peripherals
Connecting a RCVDS 05 switcher to the projector.
-
Up to 10 inputs (20 inputs when video and S-video) with the RCVDS 05 switcher and up to 90 inputs when 10 RCVDS switchers
are linked via the 5-cable output modules.
-
Serial communication with the projector.
-
Remote control buttons on the RCVDS to control the projector (source selection and analog settings)
-
The selected source number will be displayed on a 2 digit display and the selected input modules will be indicated with a LED
on the rear.