Random Access Adjustment Mode
7-6
5976194 BARCOCINE 9 31012002
Peaking
What can be done ?
Peaking improves the contours in an projected image.
How to set up ?
To change the peaking setting, handle as follow :
1.
Push the cursor key
é
or
ê
to select Peaking (menu 1).
2.
Press ENTER to display the peaking menu (menu 2).
During the creation of new settings for a RGB source the corresponding peaking is switched on as default.
The following frequency areas are available :
15 kHz - 45 kHz : Low frequency peaking.
45 kHz - 85 kHz : Mid frequency peaking.
85 kHz - 110 kHz : High frequency peaking.
If another peaking is desired or switch off, handle as follow :
1.
Push the cursor key
é
or
ê
to select to select the desired frequency area or off (menu 2).
2.
Press ENTER to activate.
Clamp Tuning
What can be done ?
The clamp tuning can be switch between 'Normal' and 'Restoration'.
Normal : for all standard sources and all sources with a backporch > 0.8 µs or for sources with noise and spikes in the signal.
Restoration : for standard sources with a backporch between 0.4 µs and 0.8 µs or for sources with sync separate or sync on green.
How to set up ?
1.
Push the cursor key
é
or
ê
to select Clamp Tuning (menu 1).
2.
Press ENTER to toggle between 'Normal' and 'Restoration'.
3.
Press EXIT to return to the picture tuning menu.
Select with
é
or
ê
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PEAKING
CLAMP TUNING : normal
PORT2 : VIDEO
LINE DOUBLER : ON
menu 1
Select with
é
or
ê
<ENTER> to accept
<EXIT> to return.
PEAKING
OFF
LOW FREQUENCY
MID FREQUENCY
HIGH FREQUENCY
menu 2
Select with
é
or
ê
<ENTER> to accept
<EXIT> to return.
menu 1
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PEAKING
CLAMP TUNING :
normal
PORT2 : VIDEO
LINE DOUBLER : ON