manualshive.com logo in svg

Barco R9002400, Owner'S Manual, Page: 40 / 102

Share
Download
Barco R9002400 Owner'S Manual Download Page 40

                             

Main Menu

5-9

5976194 BARCOCINE 9  31012002

How to enter the Service Menu ?

1

Push the cursor keys 

é

 or 

ê

 to select 'Service Menus' (menu 1).

2

Press ENTER to select.
A warning will be displayed (menu 2).  "Risk of incorrect adjustment of the projector.  The following SERVICE menus are reserved
to and to be performed only by qualified personnel !  If qualified, press <ENTER> to continue, or if not, <EXIT> to return.

3

If qualified, press ENTER (menu 3).
If not qualified, press EXIT

menu 1

Select with 

é

 or 

ê

then <ENTER>

<EXIT> to return.

MAIN MENU

Image Control
IRIS Control
Sound Control
Function keys

Service Menus

menu 2

WARNING

RISK OF INCORRECT
ADJUSTMENT OF THE
PROJECTOR.

The following
SERVICE menus
are reserved to,
and to be performed only
by qualified personnel !

If qualified, press
<ENTER> to continue, or
if not, <EXIT> to return.

ADJUSTMENT MODE

Select a path from below :

IRIS

GUIDED

RANDOM ACCESS

INSTALLATION

SERVICE

Source 01

Select with 

é

 or 

ê

then <ENTER>

<EXIT> to return.

menu 3

Summary of Contents for R9002400







































































































Reviews:

No comments