manualshive.com logo in svg

Barco R9002400, Owner'S Manual, Page: 38 / 102

Share
Download
Barco R9002400 Owner'S Manual Download Page 38

                             

Main Menu

5-7

5976194 BARCOCINE 9  31012002

How to start up the IRIS Touch Up ?

1

Push the cursor keys 

é

 or 

ê

 to select 'IRIS Touch Up' (menu 1).

2

Press ENTER to activate the touch up function.
The process starts and when successfully completed, the projector will return to image display of the current source.

menu 1

Select with 

é

 or 

ê

then <ENTER>

<EXIT> to return.

IRIS CONTROL

IRIS Touch Up
IRIS Auto Converge

IRIS Auto Converge

What can be done ?

The autoconvergence on the current source will be carried out automatically, starting from the existing settings.  By projecting
alternately red and blue lines, 25 convergence areas are aligned onto the green pattern.

How to start up the IRIS Auto Converge ?

1

Push the cursor keys 

é

 or 

ê

 to select 'IRIS Auto Converge' (menu 1).

2

Press ENTER to activate the autoconvergence function.
The process starts and when successfully completed, the projector will return to image display of the current source.

menu 1

Select with 

é

 or 

ê

then <ENTER>

<EXIT> to return.

IRIS CONTROL

IRIS Touch Up
IRIS Auto Converge

Summary of Contents for R9002400







































































































Reviews:

No comments