manualshive.com logo in svg

Barco R9002400, Owner'S Manual, Page: 87 / 102

Share
Download
Barco R9002400 Owner'S Manual Download Page 87

                             

Service Mode

8-16

5976194 BARCOCINE 9  31012002

How to undo the digital vertical linearity to midposition ?

1.

Push the cursor key 

é

 or 

ê

 to highlight 'Undo dig vert linearity to midposition' (menu 1).

2.

Press ENTER undo.

Select with 

é

 or 

ê

then <ENTER>

<EXIT> to return.

SET TO MIDPOSITION

menu 1

R&B CONVERGENCE MID

GREEN CONVERGENCE MID

FOCUS TO MIDPOSITION

E-W TO MIDPOSITION

N-S TO MIDPOSITION

DIG VERT LINEARITY MID

UNDO DIG HOR LINEARITY MID

ASTIGMATISM MIDPOSITION

ALL SETTINGS TO MIDPOS

Astigmatism midposition

What can be done ?

The astigmatism settings for the different areas can be set to their midposition.

How to set the Astigmatism to Midposition ?

1.

Push the cursor key 

é

 or 

ê

 to highlight 'Astigmatism' (menu 1).

2.

Press ENTER to select.
A confirmation screen will be displayed first (menu 2).

3.

Press ENTER to confirm.
Press EXIT to cancel the procedure to set the Astigmatism to their midposition.

Select with 

é

 or 

ê

then <ENTER>

<EXIT> to return.

SET TO MIDPOSITION

menu 1

ASTIGMATISM TO MIDPOSITION

Astigmatism settings
in current block
will be overwritten !

<ENTER> to confirm
<EXIT> to cancel

menu 2

R&B CONVERGENCE MID

GREEN CONVERGENCE MID

FOCUS TO MIDPOSITION

E-W TO MIDPOSITION

N-S TO MIDPOSITION

DIG VERT LINEARITY MID

DIG HOR LINEARITY MID

ASTIGMATISM MIDPOSITION

ALL SETTINGS TO MIDPOS

Undo Astigmatism setting to midposition

What can be done ?

'Undo Astigmatism midposition' is displayed in the Set Midposition menu in stead off 'Astigmatism midposition' when this latter is pressed.
The settings for the astigmatism can be returned to previous installed settings as long the projector is playing on the same source
( = same adjustment block).

How to undo the Astigmatism settings to midposition ?

1.

Push the cursor key 

é

 or 

ê

 to highlight 'Undo astigmatism midposition' (menu 1).

2.

Press ENTER undo.

Select with 

é

 or 

ê

then <ENTER>

<EXIT> to return.

SET TO MIDPOSITION

menu 1

R&B CONVERGENCE MID

GREEN CONVERGENCE MID

FOCUS TO MIDPOSITION

E-W TO MIDPOSITION

N-S TO MIDPOSITION

DIG VERT LINEARITY MID

DIG HOR LINEARITY MID

UNDO ASTIGMATISM MIDPOSITION

ALL SETTINGS TO MIDPOS

Summary of Contents for R9002400







































































































Reviews:

No comments