Getting Started
3-6
5976194 BARCOCINE 9 31012002
Controlling the Projector
Input selection modes
Source No
Projector input
Press button
1
Comp. Video
1
2
S-Video/Comp. Video
2
3
RGB
3
4/5
RGB (HV, SOG)
4 or 5
4/5
Component Video
6
4/5
RGB with Tri level sync 7
4/5
Component Video with
Tri-level sync
8
Input Selection via the RCU.
With the digit buttons, it is possible to select one of the above input modes.
When the source is selected
When a valid and available source is selected, there will be information displayed on the screen about that source. This information
includes :
- Source number
- Horizontal frequency
- Vertical frequency
When the entry is a non valid source number, a warning appears on the screen : '
input not available'.
When a valid source number is selected, the projector will display this source or it will wait on the selected source number until the
source becomes available. A message 'source not available' will be displayed for a short time.
When a Video or S-Video source is selected and no decoder is installed, the projector displays the folllowing message : 'Option not
installed'.
WARNING
input not
available
WARNING
source not
available
Source 02
Fh= 15.6 kHz
Fv= 50 Hz
WARNING
Option not
installed !