Getting Started
3-2
5976194 BARCOCINE 9 31012002
stand-by
sharpness
pause/park
tint
color
brightness
contrast
Overview of Functions
This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the projector remotely.
This remote control is used for source selection, control, adaptation and set-up. It includes automatic storing of :
- picture controls (Brightness, Sharpness,....)
- settings
Other functions on the control units are:
-
switching between standby and operational modes
-
switching to "pause" (blanked picture, full power for immediate restarting)
-
direct access to all connected sources
-
variable adjustment speed : when pushing continuously on the arrow keys or the picture keys, the adjustment will be executed
in an accelerated fashion.
)
)
)
)
)
$'-
(;,7
(17(5
3$86(
3+$6(
7(;7
6+$531
7,17
&2/25
%5,*+71
&2175
75(%/(
%$/$1&(
%$66
92/
1
Function keys : user programmable keys with functions for direct access.
2
ADJ. : ADJUST key, to enter or exit the adjustment mode.
3
Address key (recessed key), to enter the address of the projector (between 0 and 9). Press the recessed address key with a pencil,
followed by pressing one digit button between 0 and 9.
4
Selection key : no function for this projector
5
PAUSE : to stop projection for a short time, press 'PAUSE'. The image disappears but full power is retained for immediate
restarting.
6
STBY : stand-by button, to start projector when the power switch is switched on and to switch off the projector without switching
off the power switch.
7
Mute : no function in this projector
8
Help : on line help information (not yet available)
9
Digit buttons : direct input selection.
10 Audio controls : no function
11 Picture controls : use these buttons to obtain the desired picture analog level.
12 PHASE : not used.