![background image](http://html1.mh-extra.com/html/barco/imagepro-ii-jr/imagepro-ii-jr_user-manual-addendum_3876304117.webp)
102
ImagePRO-II • User’s Guide
4. Menu Orientation
Setting up an LED Wall
Figure 4-94.
Zoom/Pan Menu in Dual-Channel Mode
This
Zoom/Pan Menu
provides the following options:
~
Channel
(available In dual-channel mode only), supports selecting a
channel on which to adjust the video.
~
Match Input 1:1
fills the Area of Interest with the
unscaled
input image.
If you created an Area of Interest that is smaller than the default active
area for the input, a portion of the image is not displayed. You can then
use the Pan settings to display the portion of the image you want to show
on the wall.
~
Fill H
fills the active area to the left and right edges.
~
Fill V
fills the active area to the top and bottom edges.
~
Fill H/V
fills the entire active area with the
scaled
image.
~
Zoom H
zooms in or out on the horizontal center of the image.
Increasing this setting “stretches” the image to the right and left along the
horizontal plane. Decreasing this setting brings the right and left edges in
toward the center of the active area.
~
Zoom V
zooms in or out on the vertical center of the image. Increasing
this setting “stretches” the image up and down along the vertical plane.
Decreasing this setting brings the top and bottom edges in toward the
center of the active area.
~
Zoom H/V
zooms in or out both horizontally and vertically.
~
Pan H
moves the image to the right or left on the wall.
~
Pan V
moves the image up or down on the wall.
~
Units
applies to the Pan and Zoom settings. The choices are
Pixel
and
Percent
. The default setting is
Pixel
.
~
Save View
provides the opportunity to save your settings. You can save
one view for each input. When you select this option, a prompt appears.
Press
SEL
to save the view or
ESC
to cancel.
~
Recall View
restores the last saved view.
~
Reset
restores the default settings.
For additional information about creating and saving views, refer to
•
Selecting
Save Snapshot
saves the following settings:
~
All
System Menu
changes
~
All
Output Menu
changes
~
All
Input Menu
changes for all input channels
ZOOM/PAN
A
> Channel
A
Zoom H
1280
Zoom V
960