![background image](http://html1.mh-extra.com/html/barco/imagepro-ii-jr/imagepro-ii-jr_user-manual-addendum_3876304079.webp)
64
ImagePRO-II • User’s Guide
4. Menu Orientation
Configuring Outputs
~
RGB, 4:4:4, 24 bit
~
RGB, 4:4:4, 30 bit
~
RGB, 4:4:4, 36 bit
~
YCbCr, 4:4:4, 24 bit
~
YCbCr, 4:4:4, 30 bit
~
YCbCr, 4:4:4, 36 bit
The default setting upon format change is:
~
RGB, 4:4:4, to the maximum bit depth supported, as given in the EDID
information
The default setting if EDID information is invalid or not present is:
~
RGB, 4:4:4, 24 bit
The 36-bit rates may not be available if output timings are not compatible.
•
SDI 1
and
SDI 2
—
SDI 2
is only available when the dual-channel mezzanine is
installed. The options are:
~
YCbCr, 4:2:2, 30 bit
~
RGB, 4:4:4, 30 bit
~
YCbCr, 4:4:4, 30 bit
~
RGB, 4:4:4, 36 bit
~
YCbCr, 4:4:4, 36 bit
pÉííáåÖ=lìíéìí=bÑÑÉÅíë
The
Output Effects Submenu
sets properties of the output image, such as contrast and
brightness, color balance, and sharpness. From the
Output Menu
, select
Effects
to
access this menu.
Figure 4-39.
Output Effects Submenu
If the 3D/Dual Channel mezzanine is installed and the system mode is set to
Dual2K
, this
menu includes the option to change these settings for each channel.
OUT EFFECTS
> Contrast
100
Brightness
100
Color Balance
>>
Gamma
1.0
Monochrome
Off
Invert
Off
Sharpness
+0
Flicker Reduce
n/a
Image Flip
Off
Strobe Mode
Off
Strobe Rate
n/a