![background image](http://html1.mh-extra.com/html/barco/imagepro-ii-jr/imagepro-ii-jr_user-manual-addendum_3876304006.webp)
26-0904101-00 Rev 01.00
10
2)
Ethernet Port
One RJ-45 connector is provided for 10/100Base-T Ethernet Communications
with the ImagePRO-II Jr. The port is used for running the Web Interface, for
diagnostics, and for connection to an external device such as the
Encore
or
ScreenPRO-II Controller
.
The Ethernet connector is compatible with:
Standard RJ-45 Ethernet cables
Neutrik Ethercon
®
For pinout details, refer to the “Standard Connector Pinouts” section of the
ImagePRO-II User’s Guide.
Input Video Connectors
On the system’s rear panel, each of the input connectors maps to a corresponding
input button on the front panel. For additional information about any connector,
including pinouts and a list of supported formats, refer to Appendix A,
“Specifications” in the ImagePRO-II User’s Guide.
3)
DVI-I Input with Loop-through
4)
Analog Input with Loop-through
5)
SDI Input
Output Video Connectors
The user sets the output format. Output connectors are active only if they support
the selected format. If a connector cannot support the selected format, that
connector is deactivated. Therefore, all connectors may not be active at the same
time.
The default output format is [email protected]. You can select other formats for
an output or define customs formats. Outputs revert to the last saved state on
power-up.
Output colorspace is adjustable for the HD-15, and DVI connectors.
For additional information about any connector, including pinouts and a list of
supported formats for each connector, refer to Appendix A, “Specifications”, in the
ImagePRO-II User’s Guide.
6)
SDI Output