![background image](http://html1.mh-extra.com/html/barco/imagepro-ii-jr/imagepro-ii-jr_user-manual-addendum_3876304005.webp)
26-0904101-00 Rev 01.00
9
6)
LOGO and BLACK Buttons
The LOGO button enables you to capture a stored still image and transition to
and from the logo. Refer to “The LOGO Button” section of the ImagePRO-II
User’s Guide for more information.
The BLACK button transitions the display to and from black. Refer to “The BLACK
Button” in the ImagePRO-II User’s Guide for details.
7)
FRZ Button
FRZ (FREEZE) enables you to freeze a displayed image. Refer to “The FRZ
Button” in the ImagePRO-II User’s Guide for more information.
3.2.
Rear Panel
ETHERNET
Ethernet
100-240VAC 50-60Hz, 2A
SDI In
SDI Out
In
Genlock
Loop
Universal DVI-I
In
Loop
In
Universal Analog
Loop
DVI-D OUT
Analog Out
1
2
3
4
5
6
7
8
9
Figure 3-2.
ImagePRO-II Jr Rear Panel
1) AC Connector
6) SDI Output
2) Ethernet Port
7) Universal Analog Output
3) DVI-I Input with Loop-through
8) DVI-D Output
4) Analog Input with Loop-through
9) Genlock Input BNC with passive Loop-
through
5) SDI Input
Following are descriptions of each rear panel connector:
1)
AC Connector
One AC Connector with a power switch is provided to connect the ImagePRO-II Jr
to your facility’s AC power source through the supplied power cord. The integral
switch turns the unit on and off. (100-240 VAC, 50-60Hz)