![background image](http://html1.mh-extra.com/html/barco/imagepro-ii-jr/imagepro-ii-jr_user-manual-addendum_3876304072.webp)
ImagePRO-II • User’s Guide
57
4. Menu Orientation
Configuring Outputs
Figure 4-28.
Adjusted Area of Interest
To adjust the Area of Interest, you use four settings on the
Area of Interest Submenu
,
shown in the following illustration. You can also restore the default AOI.
Figure 4-29.
Area of Interest Submenu (sample)
In this menu, the following settings are available:
•
H Size
— Determines the width (in pixels) of the Area of Interest. This setting
must be equal to or less than the
H Active
setting of the output timing. The
following illustration shows an image after adjusting only the
H Size
.
Figure 4-30.
H Size Adjustment
•
V Size
— Determines the height (in lines) of the Area of Interest. This setting must
be equal to or less than the
V Active
setting of the output timing. The following
illustration shows an image after adjusting only the
V Size
.
AREA OF INTEREST
> H Size
850
V Size
1080
H Pos
0
V Pos
0
Reset