![background image](http://html1.mh-extra.com/html/barco/imagepro-ii-jr/imagepro-ii-jr_user-manual-addendum_3876304119.webp)
104
ImagePRO-II • User’s Guide
4. Menu Orientation
Restoring Factory Default Settings
oÉëíçêáåÖ=^ää=c~Åíçêó=pÉííáåÖë
To restore all default settings to the ImagePRO-II, use the following procedure:
1.
Select
Factory Reset
from the
Setup Menu
. The
Factory Reset Menu
appears.
2.
Select
Factory Reset
.
A prompt appears, asking if you want to clear all
configurations, formats, and views.
3.
Press
SEL
. The system turns off, then reboots.
If you press
ESC
to cancel the operation instead, your custom settings remain in
place and you are returned to the
Factory Reset Menu
.
oÉí~áåáåÖ=íÜÉ=fm=^ÇÇêÉëë=tÜÉå=oÉëíçêáåÖ=c~Åíçêó=
pÉííáåÖë
To restore default settings to the ImagePRO-II but retain the unit’s IP address, use the
following procedure:
1.
Select
Factory Reset
from the
Setup Menu
. The
Factory Reset Menu
appears.
2.
Select
Factory Reset, Save IP
. A prompt appears, asking if you want to clear all
configurations, formats, and views.
3.
Press
SEL
to reset the system but save the IP address. The system turns off, then
reboots.
If you press
ESC
to cancel the operation instead, your custom settings remain in
place and you are returned to the
Factory Reset Menu
.