Barco ImagePRO-II Jr, User Manual Addendum, Page: 111 / 166

96 ImagePRO-II • User’s Guide
4. Menu Orientation
Using a Logo or Internal Black
Figure 4-88. Front Panel Locked Message
2. To disable the front panel lock, press and hold the SEL and ESC buttons
simultaneously for 3 seconds. When the panel is unlocked, the display screen
displays the
Status Menu .
p~îáåÖ=póëíÉã=pí~íÉ
Save System State on the System Menu saves your custom configuration parameters in
non-volatile memory, including:
•
The currently selected input channel
•
The output configuration
•
System settings such as Black Invalid, HDCP settings, Input EDID information,
and display brightness
If you save the system state, these parameters are restored the next time you power up the
ImagePRO-II. If you
do not use this function, your custom settings are not restored during
the next system power up sequence.
rëáåÖ=~=içÖç=çê=fåíÉêå~ä=_ä~Åâ
The ImagePRO-II supports capturing and storing one full-screen image called a logo ,
which can be displayed during transitions. Typically, the logo is a corporate logo, but it can
be any still image captured from an ImagePRO-II, up to a maximum resolution of
2560x1600 . You can capture the logo from the active video input, or upload an image using
the ImagePRO-II’s USB port or the Web Interface. The logo appears on top of all other
sources when you transition to it.
You cannot scale the logo. If the logo is of higher resolution than the current output format,
the image appears cropped. If the logo is of lower resolution than the current output format,
the entire logo appears in the center of the output display. For examples, refer to
Displaying a Logo on page 98 of this chapter.
You can also set up an input to transition to internal black instead of a logo. For information
about transitioning to and from a logo or black, refer to
Setting Transitions on page 83 of
this chapter.
The ImagePRO-II provides the following ways to work with logos and internal black:
•
The LOGO and BLACK buttons on the front panel
•
The Logo Menu
Front Panel
Locked Out.
Unit ID 18
Note To save the configurations of all inputs, refer to Setting up an
LED Wall on page 101 of this chapter