92
ImagePRO-II • User’s Guide
4. Menu Orientation
Using the System Menu
When
DHCP
is off, you can manually enter a static IP address, along with a subnet mask
and gateway, in the
Set Static IP Submenu
. Consult your network administrator for a valid
IP address, subnet mask and gateway.
pÉííáåÖ=~=pí~íáÅ=fm=^ÇÇêÉëë
When a DHCP server is not available, you can set the ImagePRO-II’s IP address, using the
Set IP Submenu
shown in the following illustration.
Figure 4-82.
Set IP Submenu (sample)
To set a static IP address for the ImagePRO-II, use the following procedure:
1.
Ensure that the
DHCP
setting is
Off
.
2.
From your network administrator, obtain a valid IP address, including subnet and
gateway.
3.
On the
Ethernet Submenu
, select
Set Static IP
.
4.
On the
Set IP Submenu
, select
SUB
(net). The last character in the first field
becomes available, as indicated by the empty field and an underscore.
You must change the
SUB
parameter before editing either of the other
parameters.
5.
Turn the
ADJUST
knob to change the first value. As you continue turning the
knob, you can change all three values in this field. Values range from
000
to
255
in all four fields.
6.
Press
SEL
to accept your change in the first field. The last character in the next
field becomes available.
7.
Continue until you have created the subnet value you want. Press
SEL
.
8.
Make similar changes in the
GW
and
IP
fields.
9.
Press
SEL
to accept your final change.
^ÅÅÉëëáåÖ=íÜÉ=fã~ÖÉmolJff=oÉãçíÉäó
After you have set up the Ethernet options as described in
on page 91, use the following procedure to
set up the ImagePRO-II:
1.
On a PC, laptop, or mobile device with the Microsoft Windows OS, open a
command prompt window.
2.
Type the IP address and port on the prompt, using the following format:
> telnet xxx.xxx.xxx.xxx 10001
SET IP
> SUB
255.255.255.000
GW
192.168.000.200
IP
192.168.000.201
Note
If you press
ESC
at any time before accepting your final
change, all your edits will be removed, and the original values
restored.