58
ImagePRO-II • User’s Guide
4. Menu Orientation
Configuring Outputs
Figure 4-31.
V Size Adjustment
•
H Pos
— Using
H Pos
, you can move the image horizontally. The default value is
0
, representing the left edge of the active area. Increasing the
H Pos
value moves
the image to the right. Decreasing the
H Pos
value moves the image to the left.
You can adjust
H Pos
only after adjusting
H Size
.
Figure 4-32.
H Pos Adjustment from 0 to 400 pixels
•
V Pos
— After adjusting the
V Size
, you can move the image vertically within the
output’s active vertical limits.The default value is
0
, representing the upper edge of
the active area. Increasing the
V Pos
value moves the image down. Decreasing
the
V Pos
value moves the image up.
Figure 4-33.
V Pos Adjustment from 0 to 200 lines
To set or revert the output Area of Interest, use the following procedure:
1.
From the
Output Menu
, select
Area of Interest
. The
Area of Interest Submenu
appears, showing default settings equal to the H and V actives of the output
timing.
HPos / VPos = 0 pixels / 0 lines
H Pos = 400 pixels
V Pos = 0 lines
V Pos = 200 lines
H Pos = 0 pixels