Barco DML-1200, User Manual

Page: 23 / 113

4. Connections
4. CONNECTIONS
Overview
• Power connection
• Input connections
• Communication connections
• Linking DML-1200’s
4.1 Power connection
C
AUTION
:
Use only the power cord provided with the projector.
How to connect with the local power net
1. Connect the power cord with the power input socket of the projector (P)
P
H
Image 4-1
2. Secure the power plug by locking the plug holder clamp (H).
3. Mount a plug to the delivered power cord but take care of the local regulations about power cords and power plugs. Do not defeat
the purpose of the grounding-type plug. Plug this plug into the wall outlet.
Caution: Ensure that the power net meets the power requirements of the device, which are 200-240 V,10A 50-60Hz
Homing the device
When the DML-1200 is connected to an appropriately-rated power source, it automatically begins a homing procedure to verify that
the major functions of the device are oriented properly. This homing procedure includes movements of the projector head and yoke.
Do not block the device during its homing process to avoid a wrong detection of its end loop for tilt and pan.
R59770208 DML-1200 06/11/2009 19