Barco DML-1200, User Manual

Page: 94 / 113

13. Servicing
11.Close the third lid again using the back of the main lid. Use a cloth to dab the residue of cooling liquid.
Note: Make sure that no cooling liquid is spilled in the projector.
12.Turn in the bleed lid.
13.Close the main lid.
14.Rotate the reservoir back on its horizontal position.
15.Pressurize the circuit by turning the bolt to the left until there is 2 cm free threat between the bolt and the bottom of the reservoir
(the white indication line should be in the good area).
16.Mount the reservoir holder and turn in both screws.
17.Close the projector cover.
90 R59770208 DML-1200 06/11/2009