Barco DML-1200, User Manual

Page: 92 / 113

13. Servicing
The software of the projector blocks any movement.
Top-up procedure
1. Remove both reservoir holder screws and take off the reservoir holder.
Image 13-27
Reservoir holder
2. Turn the bolt to release the pressure (1) . Turn until the white indication line is in the Open area (membrane is at the bottom of
the reservoir) or until you feel to much resistance.
Image 13-28
Release pressure
3. If you feel to much resistance, rotate the reservoir until it is in a vertical position.
Image 13-29
Reservoir up
Note: Be careful not to kink the tubing. If necessary, remove the cable tie around the tubing and pull on the tubes while rotating
the reservoir (2 on image 13-28).
4. Turn off the main lid on top of the reservoir (A).
88 R59770208 DML-1200 06/11/2009