Barco DML-1200, User Manual

Page: 59 / 113

9. Service menu
The service patterns:
•
No pattern
• Circular on/off
• Full color
• Outline
• Horizontal sawtooth
• Vertical sawtooth
• Viewscape
• Crosshatch
• Horizontal multi burst
• Vertical multi burst
• Level 50%
• Calibration
Color patterns for the current selected service pattern
•
White
• Red
• Green
• Blue
• Cyan
• Magenta
• Yellow
• Black
A color pattern can be added to each service pattern. Therefore, select fi rst your service pattern and then your color pattern.
How to activate a pattern
1. Press Enter to start up the main menu.
2. Turn the jog dial to select Service and press Enter .
3. Turn the jog dial to select Service pattern and press Enter .
4. Turn the jog dial to select a pattern and press Enter .
The selected pattern or pattern color is displayed.
Image 9-28
Image 9-29
Image 9-30
9.5 Calibration
9.5.1 Index delay
Before starting
Set the DML in video mode by sending a value between 64 and 95 on DMX channel 13. See "DMX data", page 42 for more infor-
mation on how to select a channel and set data
What should be done ?
The index delay value should be adjusted so that the phase of the color wheel is correctly aligned. When correctly align a mono-
chrome red image e.g. will be correctly displayed. When there is a misalignment, this image will show color distortion (discoloration)
at the top and the bottom of the image.
This setting is normally factory aligned.
R59770208 DML-1200 06/11/2009 55