Barco DML-1200, User Manual

Page: 46 / 113

8. Control menu
8.5 DMX data
What can be done ?
The local generated DMX data can be used to control the device or to check if all functions are working properly. While changing a
DMX value, the device follows immediately.
The fi rst 16 channels can be controlled via the local generated DMX data. See see "DMX chart, Digital moving luminiere", page 91
for more information about these channels.
How to change a DMX value
1. Press Enter to start up the main menu.
2. Turn the jog dial to select Control and press Enter .
3. Turn the jog dial to select DMX data and press Enter .
4. Turn the jog dial to select a DMX channel and press Enter.
The selection jumps to the DMX value.
5. Turn the jog dial until the desired DMX value is reached.
While changing the value, the selected function is updated immediately.
6. Press Enter to return to the channel selection.
Image 8-11
Image 8-12 Image 8-13
8.6 DMX address
What should be done ?
Before a device can execute DMX commands, a unique address should be given to the device. That address can vary from 1 to 512.
How to set a DMX address
1. Press Enter to start up the main menu.
2. Turn the jog dial to select Control and press Enter .
3. Turn the jog dial to select DMX address and press Enter .
The selection jumps to the numeric value. which is the DMX address.
4. Turn the jog dial until the desired address is reached.
5. Press Enter to record that address and to return to the menu selection.
Image 8-14
Image 8-15
42 R59770208 DML-1200 06/11/2009