Barco DML-1200, User Manual

Page: 49 / 113

8. Control menu
Image 8-27
Image 8-28 Image 8-29
8.11 Network
What is possible ?
A selection can be made how a network can be obtained, via DHCP, via Art-Net or a preset network. When a choice is made, the
network settings are given in the 3 last lines.
How to make the selection
1. Press Enter to start up the main menu.
2. Turn the jog dial to select Control and press Enter .
3. Turn the jog dial until the second page of the control menu is displayed and turn further to select Network and press Enter .
4. Turn the jog dial to select the desired network setting, DHCP, Art-Net or preset.
Image 8-30
Image 8-31 Image 8-32
Image 8-33
About changing the IP address
When the network IP address needs to be changed to allow e.g. software upgrade, the power must be removed and reconnected
again before Projector Toolset can reconnect to the device.
8.12 Auto shutdown
What can be done ?
The device can shutdown automatically after 5 minutes when no DMX is sent to its DMX input AND when it is not connected with a
Projector Toolset or an Art-Net DMX device.
R59770208 DML-1200 06/11/2009 45