Barco DML-1200, User Manual

Page: 24 / 113

4. Connections
4.2 Input connections
Overview
VGA OUT HDSDI / SDI
IN OUT
R/P
R
G/Y B/P
B
H/S V
HDCP DVI
IN
DMX
IN OUT
10 / 100 / 1000
LMP 1
LMP 2
LMP 3
LMP 4
MP
ON
ERR
DMX
ENTER
200 V - 240 V
50/60 Hz
EXIT
Ext
VS
A B C D
Image 4-2
Input indications (truss view)
A 5–cable input
B SDI / HD-SDI input output
C HDCP DVI input
D External sync (on with embedded media player)
All inputs have two status LEDs. The green LED lights up if the input is selected as the active input. The yellow LED lights up if the
input has detected valid input syncs.
5-cable input, signal connectivity
Input signal R / P
R
G / Y B / P
B
H / S V
RGBHV R G B H V
RGBS R G B S
—
RGsB R Gs
sync on green
B
— —
5-cable input, speci fi cations
• Data and HD sources RGB and YUV [HS/VS, CS or SOG(Y)]:
-
Pixel clock maximum 170 MHz
- 8 bit/color
• Video sources RGB
-
525i, 625i, 525p, 625p
- Macrovision copy protection robust
- 8 bit/color
• Automatic detection of sync inputs but with manual override:
-
automatic mode : RGB
- manual modes : RGB HS/VS - CS, RGB SOG
• Sync signals are 75 ohm terminated.
• Signal requirements:
-
RG(s)B
o
R : 0,7Vpp ±3dB 75 Ohm termination.
o
G(s) : 1Vpp ±3dB (0,7Vpp G + 0,3Vpp Sync) 75 Ohm termination.
o
B : 0,7Vpp ±3dB 75 Ohm termination.
SDI / HD-SDI, speci fi cations
• 1 input (BNC), 1 active loop-through output (BNC)
• 10 bit/color
• SDI: 525/625 interlaced.
• Coax (75 Ohm).
20 R59770208 DML-1200 06/11/2009