System manual DICOM Theater
32
Figure 6
Click “OK” to continue. If you don’t want to replace the existing
driver, click “OK” and then click “Cancel”.
10. The “Device Confirmation” screen displays the device driver that
will be installed. If you want to change your selection, click “Back”
to return to the Device Selection Screen. Click “Next” to begin
installing the driver. Click “Cancel” to abort the driver installation.
Special Note: Once you click “Next”, you cannot cancel the driver
installation.
11. The wizard will warn you that while the driver is being installed your
display may flicker. Click “OK”.
12. When the screen shown in figure 7 below appears, click “Yes” to
continue. This screen may appear multiple times.
Figure 7
13. When the Wizard tells you that it has successfully installed the
selected driver, click “Finish”. The wizard will now begin installing
the next selected piece of BarcoMed Software. If you are working
with the default selections, this will be the BARCO DPMS
InstallShield Wizard. Please turn to the section, “BARCO DPMS
Screen Saver Installation”.
Summary of Contents for DICOM THEATER
