System manual DICOM Theater
14
USB in
BNC in
VGA in
USB out
USB in
COM port
RS-232 in
Optical sensor
USB out
VGA in
VGA in
Video out
(2 boards)
USB in
Dual grayscale images on a single projector
By using the projector’s Picture-in-Picture function, you can display
images from two imaging boards on one projector.
Proceed as follows:
1 Connect Head A from the first imaging board to the first display’s
VGA video input by means of the D-Sub15-to-D-Sub15 cable.
2 Connect Head B (marked “Projector out”) from the first imaging
board to the projector BNC input by means of the D-Sub15-to-5 BNC
cable (15m / 50 ft).
3 Connect Head A from the second imaging board to the second
display’s VGA video input by means of the D-Sub15-to-D-Sub15
cable.
4 Connect Head B (marked “Projector out”) from the second imaging
board to the projector VGA video input by means of the D-Sub15-to-
D-Sub15 cable (15m / 50 ft).
5 Connect a free PC COM port to the projector RS-232 connector by
means of the D-Sub9-to-D-Sub9 cable( 15m / 50 ft).
6 Connect a free PC USB connector to the display USB In connector
by means of a USB-to-USB cable.
7 Connect the first display’s USB out connector to the second display’s
USB in connector by means of a USB-to-USB cable.
8 Connect the optical sensor to another free PC USB bus. If the cable
is not long enough, you have to use a USB booster/extender.
Installation of the sensor is described more in detail in the section
“MediCal and Dicom Theater software installation and usage”.
Note: Two BarcoMed imaging boards must be installed in the computer.
Head B
Head A
Summary of Contents for DICOM THEATER
