manualshive.com logo in svg

Barco DICOM THEATER, System Manual, Page: 27 / 82

Share
Download
Barco DICOM THEATER System Manual Download Page 27

System manual DICOM Theater

28

SOFTWARE INSTALLATION

Overview

The BarcoMed Software Installation section has been divided into two
sections, one for each of the two supported versions of the Windows
operating system. They are: Windows 2000 and Windows XP.

Software

In addition to the device drivers for your BarcoMed Display
Controller(s), your BarcoMed Software CD also includes several
additional tools. They are: the BarcoMed Driver Tab, the BarcoMed
Hardware Tab, and the BARCO DPMS Screen Saver. The BarcoMed
Driver Tab and the BarcoMed Hardware Tab are automatically installed
with BarcoMed Display Controller driver and become part of the
Windows Display Control Panel. The BARCO DPMS (Display Power
Management Signaling) Screen Saver is an optional tool which must
be installed separately.

The BarcoMed Driver Tab helps you manage the special features of
your BarcoMed Display Controller(s). The BarcoMed Hardware Tab
gathers information about the BarcoMed Display Controller(s) and your
system that is useful when diagnosing problems. The BarcoMed
Hardware Tab can also be used to update the firmware on BarcoMed
Display Controllers that are based on the AURA chipset.

BarcoMed Software Installation Wizard

The BarcoMed Software Installation Wizard is a Graphical User
Interface (GUI) designed to install the BarcoMed Display Controller
Driver, and the BARCO DPMS Screen Saver in a single operation
prior to rebooting. The user may also use the BarcoMed Software
Installation Wizard to reinstall either the BarcoMed Display Controller
Drivers and/or modify, repair or remove the BARCO DPMS Screen
Saver from his system. The BarcoMed Display Controller Driver
should be installed prior to installing the BARCO DPMS Screen
Saver.

Summary of Contents for DICOM THEATER



















































































Reviews:

No comments