Barco DICOM THEATER, System Manual

Page: 15 / 82

System manual DICOM Theater 16
Video out
BNC in
VGA in
USB out
USB in
COM ports
RS-232 in
Optical sensor
Video out
BNC in
VGA in
USB in
RS-232 in
Optical sensor
USB out
USB out
Dual-head installation
Proceed as follows:
1 Connect Head A from the first imaging board to the first display’s
VGA video input by means of the D-Sub15-to-D-Sub15 cable.
2 Connect Head B (marked “Projector out”) from the first imaging
board to the first projector BNC video input by means of the D-
Sub15-to-5 BNC cable (15m / 50ft).
3 Connect Head A from the second imaging board to the second
display’s VGA video input by means of the D-Sub15-to-D-Sub15
cable.
4 Connect Head B (marked “Projector out”) from the second imaging
board to the second projector BNC video input by means of the D-
Sub15-to-5 BNC cable (15m / 50ft).
5 Connect a free PC COM port to the first projector RS-232
connector by means of the D-Sub9-to-D-Sub9 cable (15m / 50ft).
6 Connect another free PC COM port to the second projector RS-232
connector by means of the D-Sub9-to-D-Sub9 cable (15m / 50ft).
7 Connect a free PC USB connector to the first display’s USB In
connector by means of a USB-to-USB cable.
8 Connect the first display’s USB out connector to the second
display’s USB in connector by means of a USB-to-USB cable.
9 Connect the first optical sensor to another free PC USB bus. If the
cable is not long enough, you have to use a USB booster/extender.
Head B
Head A