Barco ClickShare, Installation Manual

Page: 23 / 53

4. Installing ClickShare
4. INSTALLING CLICKSHARE
This chapter gives an overview of the different ways to install the ClickShare product.
•
Installation methods
• On the table
• Wall mounted
• Mounted in a rack
• Mounted to the ceiling
• Connecting
W
ARNING
:
Do not connect to the mains power during installation.
W
ARNING
:
Make sure the mains power is within range of the users at all times!
C
AUTION
:
You cannot mount the Base Unit under a random angle. It should be mounted horizontal.
W
ARNING
:
Only use the antennae that are delivered with the product. Other antennae are not allowed.
4.1 Installation methods
Introduction to the installation methods
There are three different ways to install the Base Unit in a meeting room. The Base Unit can be wall mounted or put on the meeting
room table. A third possibility is to mount the Base Unit to the ceiling.
The antennae are removable so they can be fi xed to the Base Unit depending on the way the Base Unit is installed in the room. You
can rotate the antennae for better wireless connection.
Using extension cables for the antennae is allowed, but this can reduce performance.
For optimal performance, install the Base Unit close to the display and avoid obstacles between the Base Unit
and the Buttons. Do not block the fan inlets and outlets of the Base Unit!
4.2 On the table
Placing the Base Unit on a table
You can easily put the Base Unit on a meeting room table.
The total weight of the Base Unit is 2,6 kg.
C
AUTION
:
When placing the Base Unit inside a closed cabinet, make sure there is suf fi cient ventilation for
hot air exhaust.
R5900004 CLICKSHARE 21/08/2012 13