Barco ClickShare, Installation Manual

Page: 27 / 53

4. Installing ClickShare
4.5 Mounted to the ceiling
Mounted to the ceiling
You can use the mounting brackets included in the ClickShare box to mount the Base Unit to a (false) ceiling.
Necessary tools
• a drill (type of drill depends on the type of ceiling)
• T10 torx screwdriver
Necessary parts
• Mounting brackets (included in the ClickShare box)
• 4 mounting screws
To install the Base Unit to the ceiling
1. Drill four holes in the ceiling according to the dimensions indicated in the picture below.
277mm
157mm
Image 4-4
2. Remove the four T10 torx screws at the bottom of the Base Unit.
R5900004 CLICKSHARE 21/08/2012 17