Barco ClickShare, Installation Manual

Page: 17 / 53

2. ClickShare Specifications
Standby button
The button at the front of the Base Unit has a power on/off function and a standby function.
• When the system is awake, a short push triggers the system to go into standby mode.
• When the system is in standby mode, a short push triggers the system to wake up.
• When the system is powered on, a long push makes the system to shut down and power off.
• When the system is shut down, a long push or short push triggers the system to start up.
Back layout of the Base Unit
At the back of the Base Unit you can fi nd the rocker switch, the label, the ports and connectors of the Base Unit.
1 2 3 4 5 6 7 8 9 10 1
Image 2-3
Backside of the Base Unit
1 Fixture points for the antennae
2 Label containing the article number and power rating of the product
3 Mains power connector
4 Rocker switch
5 DVI-I display connector
6 DisplayPort connector
7 LAN Ethernet connection
8 4 USB ports
9 Audio In port
10 Audio Out port
Rocker switch
You can use the rocker switch to power on and off the Base Unit.
• To switch on the Base Unit, set the rocker switch to “I”.
• To shut down the system, set the rocker switch to “0”.
Mechanical fi xture points
At the bottom of the Base Unit you can see the mechanical fi xture points.
Antennae
Two antennae are included in the ClickShare box at purchase. To avoid damage during transport, they are not pre-mounted. De-
pending on the installation method you should secure the antennae to the back of the Base Unit or to the front panel of the rack
mount.
You can rotate the antennae for better wireless connection.
Ventilation grids
On the top and sides of the Base Unit you can fi nd ventilation grids.
R5900004 CLICKSHARE 21/08/2012 7