Barco ClickShare, Installation Manual

Page: 32 / 53

5. Configuring ClickShare
Image 5-2
Unplug Button from Base Unit
The Button is now ready for use.
5.2 Pre-install of the Client software
Client pre-install
You can pre-install the ClickShare software on your laptop or on company level. How this is done depends on your IT infrastructure.
When the software is pre-installed, a launcher application runs in the background. When you plug the Button in your laptop, the
ClickShare application will be run from the Button automatically. There is no need to run the
fi le from the Button.
The pre-installer can be downloaded from the Barco website or from the Button mass storage drive in the folder Launcher service .
5.3 Web Interface
Overview
• Accessing the ClickShare Web Interface
• Con fi guring ClickShare through the Web Interface
5.3.1 Accessing the ClickShare Web Interface
Getting access to the Web Interface
There are three ways to access the ClickShare Web Interface:
• Via the LAN
• Via a crossed cable
• Via the Base Unit wireless network
To access the Web Interface via the LAN
1. Open a browser.
Note: Supported browsers are Internet Explorer, Firefox, Google Chrome and Safari.
2. Browse to the IP address you can fi nd in the top left corner of the ClickShare welcome screen.
Note: The IP address is only visible when the Base Unit is connected to the LAN.
A login screen appears.
22 R5900004 CLICKSHARE 21/08/2012