Bandit
36
Copyright 3/19
MODEL BTC-150
MAINTENANCE
Each day before starting your machine these checks must be made:
DAILY START UP & MAINTENANCE CHECK LIST
1. Check the safety decals and engine gauges, replace if damaged.
2. Check, maintain, and service all safety equipment for proper operation:
deflection chains, cab window guard, cab tilt cylinder lock, etc.
3. Check entire machine for loose nuts, bolts, and components.
4. Check all guards to make sure they are tight and securely in place.
5. Check the condition of the mower head/stump grinder wheel and attachment.
6. Check the condition of the cutter teeth, tool holder, and hardware.
7. Grease cylinder lug pin bushings with 1 to 2 shots.
8. Grease mower head bearings with 1 shot for every hour of use, if equipped.
9. Grease stump grinder wheel bearings.
10. Grease slew ring bearings on stump grinder attachment with 2
shots in each locations.
11. Check and adjust mower head belt tension.
12. Check and adjust stump grinder head belt tension.
13. Check and always maintain hydraulic oil level at 7/8 full.
14.
Check to ensure all hydraulic shut-off valves are open.
15.
Check all hoses, fittings, lines, and tanks for damage and fluid leaks.
16. Check fuel level. (Running out and repriming is time consuming).
17. Check engine oil, coolant levels, and correct engine speed. Follow engine
manufacturer's manual specs. Engine must be level to check fluids.
18. Check DEF level on Tier 4 engines. Fill to engine MFG's manual recommendations.
19. Check radiator and debris screen. Clean as necessary. Clean cooling fan and
shroud on air cooled engines.
20. Check oil coolers. Clean as necessary.
21. Check A/C condenser. Clean as necessary.
22.
Check A/C filter (Located behind the cab, on the front of the A/C).
Clean as necessary.
23. Check air cleaner, precleaner, and vacuator valve. Clean as necessary.
24. Check hydraulic control valves and ensure they operate and shift correctly.
25. Inspect, adjust, lubricate tracks per manufacturer’s manual recommendations.
26. Check around the entire machine for any foreign objects, tools, cans, saws, etc.
27. Clean & remove any debris that builds up on top of the mower or the stump
grinder attachment (if equipped).
28. Review all safety procedures on decals, from manual, and from video.
29. Wear all applicable safety equipment: hard hat, face shield, gloves, eye
protection, ear protection, etc.
30. Turn battery disconnect switch on.
31. Make sure the throttle switch is in the idle position on the control panel.
32. Remember to check EVERYTHING on the checklist.
OK REPAIRED
WEEKLY CHECK LIST
Every week these checks must be made:
1. Grease mower overhung load adapters with 2 shots on both sides
of mower, if equipped.
2. Lubricate steel friction areas: pivoting, hinged, sliding, & rotating areas
(i.e. doors, cab tilt hinge, winch rollers, etc).
3. Remove the beltshield mower/stump grinder attachment and clean out.
4. Check alternator and fan belts on engine.
OK REPAIRED
Summary of Contents for BTC-150
