Bandit
100
Copyright 3/19
MODEL BTC-150
245811760545 29Dec2017
Page 21
Maintenance
1. The Outputs in Controller1 (C1) are organized into 2 groups, each group has a supply fuse.
The status of each fuse is shown at the top of each group. If multiple outputs from the same
group have red status, check the supply fuse for that group as well as the individual wires to
each coil.
2. Outputs on Controller1 (C1) can be diagnosed when energized for wire break or short circuit.
Green is "good", Red is "bad" meaning go check wiring. Some outputs are only used for signals
or low power devices and cannot be diagnosed.
(The red number behind the Eng Run output description is a current measurement to Eng ECU)
1
2
Summary of Contents for BTC-150
