Bandit
91
Copyright 3/19
MODEL BTC-150
245811760545 29Dec2017
Page 12
Setup
1. Navigate back.
2. Navigate to Setup6 page and more setup options.
5. and 8. Highlight Up or Down to the next value you would like to adjust.
6. and 7. Adjust the value that is currently highlighted.
LOAD CONTROL IN STUMP GRINDER MODE
If Load Control is turned ON in Grinder Mode, the Swing Speed will automatically slow down if
the engine lugs too much under load. In the example screen shot above, if the engine RPM was
at or above LdCntrlGrndrRPMhi 2150rpm the Load Control system would allow 100% of
whatever Swing Speed the operator has dialed in on the Main Engine page, ex on pg1 shows
80% would be the limit at full joystick deflection. Then if grinding becomes aggressive and the
engine lugs down under load, when the engine RPM decreased to LdCntrlGrndrRPMlo 1800rpm
or below, the Load Control System would reduce the operators limit to LdCntrlGrndrReduc 50%;
that is 50% of the 80% Swing Spd = 40% is now the limit at full joystick deflection. The system
proportionally applies a reduction between LdCntrlGrndrReduc (50%) and full 100% as the
engine RPM varies under load between 1800-2150rpm.
LOAD CONTROL IN MOWER MODE (Load Control Mower Type HEAD)
If Load Control is turned ON in Mower Mode and LdCntrlMwrType in Setup1 is ‘Head’, the
Cutter Head Speed will automatically slow down if the engine lugs too much under load. In the
example screen shot above, if the engine RPM was at or above LdCntrlMwrRPMhi 2150rpm the
Load Control system would allow 100% of whatever Cutter Speed that the operator has dialed
in on the Main Engine page, ex on pg2 shows 100% would be the limit. Then if grinding
becomes aggressive and the engine lugs down under load, when the engine RPM decreased to
1800rpm or below, the Load Control System would reduce the operators limit to
LdCntrlMwrReduc 80%; that is 80% of the 100% CutterSpd = 80% is now the limit. The system
proportionally applies a reduction between LdCntrlMwrReduc (80%) and full 100% as the
engine RPM varies under load between 1800-2150rpm.
5
6
7
8
1
Summary of Contents for BTC-150
