Bandit
103
Copyright 3/19
MODEL BTC-150
245811760545 29Dec2017
Page 24
Maintenance
The joysticks on this machine send all of their signals via CAN messages and therefore cannot be
checked physically with a voltmeter. This Maintenance screen is a tool used to function check all inputs
coming from the joysticks to ensure they are working properly. With the ignition ON but ENGINE NOT
RUNNING, work through each button and make sure the corresponding values change. The numbers
shown are raw values that the program translates into commands.
(The red number below the Red/Green status LEDs is an error count of the number of times
each joystick has lost communication with the main controller).
1. Press Joystick Swap to temporarily move all left side functions to the RH Joystick and all right
side functions to the LH Joystick. The Joy Swap label will turn green and “JOYSTCIK SWAP” will
blink on all pages. This feature provides a ‘limp home’ capability in case one joystick is
malfunctioning.
(CAN based joysticks cannot control different functions just by exchanging connectors. When
they are connected to the CAN network at any location, they identify themselves as LH or RH
joystick respectively and will operate only their assigned functions. A selector button is needed
to change their assigned functions inside the program).
Summary of Contents for BTC-150
