Bandit BTC-150, Operating Instructions Manual

Page: 110 / 113

Bandit
108
Copyright 3/19
MODEL BTC-150
245811760545 29Dec2017 Page 29
[ControlLights]
- If communication is lost with Keypad A3, lights will turn ON.
[ControlLockPins]
- HydDisable, EngRunOut, not SeatSwDelay, disables Lock Pins
[ControlMain]
- HydDisable, EngRunOut, not SeatSwDelay, disables Main
- Float Trigger has 200ms delay.
- Not Mower Mode, HydDisable, EngRunOut, not SeatSwDelay, disables Float
- Separate Float valve vs Main U/D valve w/ 4 th -pos
[ControlPushBar]
- Not Mower Mode, HydDisable, EngRunOut, not SeatSwDelay, disables PushBar
[ControlStarter]
- Volvo start command sent via J1939 (FF46)
-
KeyStartIn
will sound start beeper
(StartHornOut)
for 50ms seconds and then fire starter
solenoid (StartSolOut) .
- If the Eng E-Stop has been triggered, dead-crank starting is permitted, but engine will not fire.
- If Eng Speed is above 450rpm for 300ms start cranking is prevented.
[ControlSwing]
- Not Grinder Mode, HydDisable, EngRunOut, not SeatSwDelay, disables Swing
- Mod10h34 is Gate in Mower, Swing in Grinder
[ControlTilt]
- HydDisable, EngRunOut, not SeatSwDelay, disables Tilt
[ControlTracks]
- HydDisable, EngRunOut, not SeatSwDelay, disables Tracks
- Track Reverse on either track will fire TrackBeeper
- RampRange1 Ascend 1000/1000 per sec, Descend 2500/1000 per sec
- RampRange2 Ascend 2500/1000 per sec, Descend 2500/1000 per sec
- RampRange3 Ascend 5000/1000 per sec, Descend 5000/1000 per sec
[ControlWinch]
- Head ON, HydDisable, EngRunOut, not SeatSwDelay, disables Winch
[Inputs]
- Seat Switch has 3sec OFF delay
- E-Stop has 100ms OFF delay
- Accum Sw forced true has 5sec OFF delay
[Outputs]