Bandit
106
Copyright 3/19
MODEL BTC-150
245811760545 29Dec2017
Page 27
Notes
A sample pop-up diagnostic message (the error shown implies that particular machine had
electric valves controlling the Discharge Conveyor).
SPN's that are unique to Bandit electronic controls
SPN FMI Descrip
523001
31 System E-Stop because Hood Pin / Mill Door Switch is Open
523002
31 FC Clutch Fault or Temp Fault. Inspect Gate Position, Gate may open to prevent jamming when FC clutch dropout.
523003
31 Outputs from Controller to Radiator Fan Drive Pump are either open or shorted. Check Wiring.
523019
31 Hyd Oil Level Low
523020
31 Accumulator Gas PSI Low for at least 5sec, Cutter OFF
523021
31 Hyd Oil Temp Above 180F (82C)
523022
31 Hyd Oil Temp Above 200F (93C), Eng limit to 1600rpm until temp below 195degF
523023
31 Hyd Oil Temp Above 220F (104C), Cutter OFF and Eng limit to 1200rpm until temp below 200F
SPN's that are applicable to varied DPF type Tier4 engines
SPN FMI Descrip
3251
0 cu DPF is full of soot. Contact engine service center.
3251
16 cu DPF is nearly full of soot. Goto MENU - DPF and Force a Regen.
3703
31 ca DPF is nearly full of soot. Goto MENU - DPF and Force a Regen.
3714
31 ca DPF is nearly full of soot. Goto MENU - DPF and Force a Regen.
3715
31 ca DPF is full of soot. Contact engine service center.
3719
0 ca jd DPF is full of soot. Goto MENU - DPF and Force a Regen. Contact service center.
3719
15 jd DPF is nearly full of soot. Goto MENU - DPF and Force a Regen.
3719
16 ca jd DPF is nearly full of soot. Goto MENU - DPF and Force a Regen.
Summary of Contents for BTC-150
