Bandit
51
Copyright 3/19
MODEL BTC-150
This machine is equipped with “Petro-Canada Hydrex XV” hydraulic fl uid. It is recommended to replace with
the same. “Petro-Canada Hydrex XV” is an all season hydraulic fl uid. This is a premium performance, long
life anti-wear, hydraulic fl uid, designed for all season use in heavy duty hydraulic systems. “Petro-Canada
Hydrex XV” allows year round use under wide extremes of temperature. It allows the hydraulic system to
start at temperatures as low as -40°C/-40°F, under no load conditions and it improves lubrication of hydraulic
components at high operating temperatures. It will also help protect against hydraulic failures during the
wide temperature swings of spring and fall. To fi nd the closest “Petro-Canada Hydrex XV” dealer call
1-866-335-3369, press 1 for English, then 1 for lubricants, then press 2 for new customer. Or go to “lubricants.
petro-canada.com” and click on “Contact Us” then click “Request A Quote” to fi nd your nearest Petro-Canada
dealer.
Multi Viscosity motor oils are not recommended to mix with “Petro-Canada Hydrex XV” hydraulic oil. AW oils
may mix with “Petro-Canada Hydrex XV” hydraulic oil. The following are specifi cations and authorizations of
compatible oils. Only a high quality anti-wear (AW) hydraulic oil containing foam, corrosion, rust and oxidation
inhibitors should be used. This viscosity grade depends on the oil temperature in service, based on the climate
and operating conditions.
HYDRAULICS
It is very important after you have operated a new machine for approximately an hour to shut down the machine
and recheck all hydraulic fi ttings. Relieve all pressure and retighten as needed.
DO NOT GO NEAR HYDRAULIC LEAKS! High pressure oil easily punctures skin causing serious injury, gangrene,
or death. Avoid burns from fl uid. Hot fl uid under pressure can cause severe burns. DO NOT use fi ngers or skin to
check for leaks. Lower load or relieve hydraulic pressure before loosening fi ttings. Relieve all pressure in the system
before disconnecting the lines, hoses, or performing other work. Use a piece of cardboard to fi nd leaks. Never use
your bare hands. Allow system to cool down to ambient temperature before opening any coolant or hydraulic oil
system.
In cold weather situations let your hydraulic system idle for approximately 15 minutes to allow the system to warm
up to operating temperature.
WARNING
!
DO NOT operate this machine unless all hydraulic control devices operate properly. They must function,
shift and position smoothly and accurately at all times. Faulty controls can cause personal injury!
WARNING
!
HYDRAULIC FLUID REQUIREMENTS
Hydrex XV
ISO 22, AW
ISO 32, AW
ISO 46, AW ISO 68, AW ISO 100, AW
Viscosity Index
>235
>95
>95
>95
>95
>95
Flash Point
>240°C/464°F >200°C/395°F >210°C/410°F >220°C/430°F >220°C/430°F >240°C/464°F
Oxidations
Stability
(ASTM D0943)
>9,000 Hours >3,000 Hours >3,000 Hours >3,000 Hours >3,000 Hours >3,000 Hours
Cold Start-up,
No Load, Max -40°C/-40°F -34°C/-29°F -26°C/-14°F
19°C/-3°F
-9°C/16°F
-4°C/24°F
HYDRAULICS
Summary of Contents for BTC-150
