MN1957
Basic Installation 3-3
www.baldormotion.com
3.1.3 Other requirements for installation
The components you will need to complete the basic installation are:
The NextMove ESB-2 re24 V power supply capable of supplying 2 A
continuously. It is recommended that a separate fused 24 V supply is provided for the
NextMove ESB-2, with the fuse rated at 4 A maximum. If digital outputs are to be used, a
supply will be required to drive them - see section 4.3.2.
A PC that fulfils the following specification:
A USB cable (supplied), or RS485/422 serial cable (not supplied).
The PC operating system user manual, if you are not familiar with Windows.
Minimum specification
Recommended specification
Processor
Intel Pentium
III
500 MHz
Intel Pentium
III
/ 4 or equivalent
1 GHz or faster
RAM
128 MB
1 GB
Hard disk space
50 MB
50 MB
CD-ROM
A CD-ROM drive
Communication
USB port or RS232 / RS485/422 serial port
Screen
1024 x 768, 16-bit color
1152 x 864, 16-bit color
Mouse
A mouse or similar pointing device
Operating
system
Windows 2000, Windows XP or Windows Vista
Servo Systems Co. • 115 Main Road • P.O. Box 97 • Montville, NJ,
07045-0097 • (973) 335-1007 • Toll Free: (800) 922-1103
Fax: (973) 335-1661 • www.servosystems.com
