Baldan CRI, Instruction Manual

Page: 14 / 68


The CRI must not be operated by untrained people, i.e. people who do not know to properly
operate it.
Do not transport or work with the CRI near obstacles, rivers or streams.
The transportation of people on self-propelled machines and implements is forbidden.
Changes to the original CRI characteristics are not allowed, as they may alter the safety,
operation and life of the CRI.
Read all safety information contained in this manual and the CRI carefully.
Read or explain all the procedures of this manual to the operator who cannot read.
Always check that the CRI is in perfect conditions of use. In the event of any irregularity that
may interfere with the operation of the CRI, ensure proper maintenance before any work or
transportation.
Maintenance and especially inspection in CRI risk areas should be done only by a qualified or
qualified worker, observing all safety guidelines. Before starting maintenance, disconnect all CRI
drive systems.
Periodically check all components of the CRI before using it.
Due to the equipment used and work conditions on field or in maintenance areas,
precautions are required. Baldan has no direct control over precautions, so it is the owner's
responsibility to implement safety procedures while working with CRI.
Check the recommended minimum tractor power for each CRI model. Only use tractor with
power and ballast compatible with the load and topography of the terrain.
When transporting the CRI, travel at speeds compatible with the terrain and never exceed 16
km/h, as this reduces maintenance and consequently increases the life of the CRI.
Alcoholic beverage or some medications may cause loss of reflexes and change the
operator´s physical conditions. Therefore, never operate this CRI under the influence of these
substances.
Read or explain all the procedures of this manual to the operator who cannot read.
In case of doubts, refer to Post-Sales.
Telephone: 0800-152577 / E-mail: posvenda@baldan.com.br
Instruction Manual