Baldan CRI, Instruction Manual

Page: 24 / 68


To attach the front and rear frames to the upright, proceed as follows:
01 - Place the front (1) and rear (2) frames in a clean and flat place.
02 - Then install the upright (3) on the front (1) and rear (2) frames by fastening them
through the bolts (4), locking lugs (5), plain washers (6), locking washers (7) and nuts (8).
8
6
8
6
7
7
5
4
2
3
1
5
4
To lift the upright (3), follow the instructions on page 55.
Ignoring this warning may cause severe accidents or death. ATTENTION
Instruction Manual