5
6
4
7
3
1
2
To increase or decrease the harrow opening, proceed as follows:
01 -
Unscrew the nuts (1), locking washers (2), plain washers (3), remove locks (4) and
bolts (5).
02 -
Then adjust the frames (6) by decreasing or increasing their opening.
03 -
Then, fasten the frame (6) to the upright (7) by means of the bolts (5), locks (4) plain
washers (3), spring washers (2) and nuts (1).
INCREASES
OPENING
INCREASES
OPENING
DECREASE
OPENING
DECREASE
OPENING
To obtain an ideal penetration of discs, the opening of the harrow must be adjusted,
which varies according to the type of soil:
-GROUNDS OF GREATER PENETRATION DIFFICULTY:
The harrow opening should be increased.
-LIGHT AND LOOSE GROUNDS:
The harrow opening should be reduced.
REAR SECTION
FRONT SECTION
IMPORTANT
We advise you to control the depth of CRI's
work by opening the disc sections and using
the tires only in places where CRI penetrates
too much.
To start the job, we recommend using a
medium opening in the disc sections. If you
need
more
penetration,
increase
the
opening angle of the rear section.
The front section generally does not operate
with an opening larger than the rear section.
Wheels also assist in depth control of the
discs.
OBSERVATION
INCREASES OPENING
: Higher Depth.
DECREASES OPENING :
Lower Depth.
Instruction Manual
Summary of Contents for CRI
