Baldan CRI, Instruction Manual

Page: 47 / 68


The CRI has been developed to provide maximum performance over land conditions.
Experience has shown that periodic maintenance of certain parts of the CRI is the best
way to help you avoid problems, so we suggest checks.
The tires should always be properly calibrated avoiding early wear due to excess or
lack of pressure.
ATTENTION
When calibrating tires, do
not exceed the
recommended calibration.
CRI 12 AND 14 DISCS
STANDARD
CRI 16 TO 30 DISCS
STANDARD
TIRES 600 X 16 6 CANVAS
USE 44 LBS/POL²
TIRES 750 X 16 10 CANVAS
USE 60 LBS/POL²
TIRES 11 X 15 10 CANVAS
USE 44 LBS/POL²
The pressure of the tractor tires should be
performed according to the manufacturer´s
recommendation.
Never weld the wheel mounted with tire, the heat may cause air pressure increase
and provoke the explosion of the tire.
When filling the tire, position yourself besides the tire, never in front of it.
To fill the tire, always use containment device (armor cage).
Assemble the tires with proper equipment. The service should only be performed by
people qualified for the work.
CRI 16 TO 30 DISCS
OPTIONAL
NOTE IMPORTANT
Instruction Manual